Peel No Residue 50mic PE Protective Film for Stainless Steel Plates Laser Cutting Surface Protection

• Customization: Available
• Usage: Packaging Film, Logistics Film
• Type: Metallized Film
• Model NO.: LC-06
• Material: PE
• Feather: Water Soluble
• Hardness: Soft
• Transparency: Opaque
• Processing Type: Blow Molding
• Product Name: Protective Film for Stainless Steel Sheet
• Thickness: 30 Mic-150 Mic
• Width: 10mm-1600mm
• Length: 30m-3600m
• Logo: Custimzied Logo
• Sample: Freely
• Certificate: CE, Rosh, ISO, CNAS
• Delivery Time: 7-15days
• Transport Package: Roll Packing, Pallet Packing, Box Packing
• Specification: 1.52m*15m
• Trademark: Tianrun
• Origin: China Henan Xinxiang
• Production Capacity: 200000000 Square Meter/Square Meters Per Year
• Package Size: 25.00cm * 25.00cm * 25.00cm
• Package Gross Weight: 2.000kg

Product Description

Product Description

Description:

Our PE Laser Cutting Protective Film is specially designed to protect stainless steel surface from being scratched and damaged during the fabrication of laser cutting, installation or transportation. The laser film uses environmental polyethylene film as carrier and coated with natural rubber adhesive. It can be applied to mirror surface, blasted or sanded surface, and other 3D or angled surfaces and provides very stable firmly adhesion to the surfaces. The most important point is after peeling off the film, the surface should remain perfectly clean and untouched. We can customize both middle and high adhesion as per customer demands and also provide printing arrows and stripes to help quickly identify the polished direction for the stainless steel laser film

Product Features:
1. More environmental Polyethylene film as a carrier;
2. Natural rubber adhesive coated;
3. Improve your brand image by having your logo & contact details on;
4. Easy to apply & remove, with no adhesive residue after removal;
5. Hot-temperature endurable, anti-aging;
6. Stable adhering capacity and Special easy-peel;
7. Protect the surfaces not to being polluted, corroded, and scratched during the process of produce, transport, store, and installation.

Product Parameters

 

Material	Polyethylene (PE)
Glue type	Rubber glue
Film blowing process	3 layer coextrusion
Recommended thickness	50mic, 60mic, 70mic, 80mic, 90mic, 100mic;
Recommended length	300m,500m,1000m;
Recommended width	1000 - 1300 mm
Colour	black&white
Printing	up to 3 colour
Core diameter	76.2mm
Product performance	Provide a protective barrier to scratches, marks, damage, and dirt in the process of bending, pressing, punching, cutting, drilling, milling, roll forming, transportation and installation.
Recommended Peel Strength	300gf/25mm
Elongation transverse	300%-400%
Elongation longitudinal	320%-450%
Shelf life	24month

Application

Installation Instructions

 

The instructions and operation of the laser cutting protective film are as follows:
1. Preparation: Before starting the laser cutting protective film, make sure that the surface of the material to be cut is clean and free from dust, oil, etc.. If necessary, clean the
surface of the material with detergent and clean cloth to ensure the adhesion of the protective film.
2. Paste the protective film: Lay the laser-cutting protective film flat on the surface of the material to be cut. In the beginning, gently peel off the backing paper from one side of the film, and at the same time, use your fingers or a squeegee to tighten the film on the surface of the material. Gradually peel off the backing paper and avoid air bubbles during the protective film lamination process.
3. Adjustment and Trimming: Ensure that the protective film is fully adhered to the surface of the material being cut. If necessary, use a knife or scissors to trim the protective film at the edges to match the shape and size of the material.

 

4. Start cutting: Start the laser cutter and follow the normal cutting procedure. The laser-cutting protective film will protect the material surface from laser-induced burns and contamination during the cutting process.

5. Cutting Completed: After completing the cut, turn off the laser cutter and wait for the material and protective film to cool down. Do not touch the protective film or the surface of the material easily until the material has cooled down completely to avoid injury.

6. Remove the protective film: After the material and the protective film have cooled, slowly remove the protective film starting from one side. Ensure that the film is removed smoothly and does not damage the surface of the cut material.

 

Company Profile